Thread: CCcam and Firewall

Have just changed my firewall from a simple NetgearWNR2000 to a Cisco WRVS4400W and cannot make card sharing work. Have tried to open the ports I use, but still no access. Are there any protocols that must be enabled in adition, or can someone explain me how to proceed

Regards
UH

Hello ulfh, can you please give some more info about this router because i did not find any info about the (Cisco WRVS4400W ) on the internet.
Normally only the tcp port most be opend for sharing, is this the only router used or is there another router in de network ?

Enzofielt

Thanks alot for your reply!

I find the router as WRVS4400N. I have opened port 38003 for CCcam and used UDP - shoud I usd TCP instead? There are other ports mapped as well, but this is the only mapped to my DreabBox D600. I am running PP, and use CCcam version 2.0.7.


This is the only router used.

Cheers

UH

Just checked - have also opened for TCP. Map port 38003 to port 1200 in both cases

Try only using 38003 tcp mapped to your DM600 al other ports are not needed for sharing.

cisco..jpg