I been a Newcs user for quite a while and been running it on my Win server. A couple of months ago I bought a Linksys WRT610 router and I tried for quite a while to get NewCS and my USB Phoenix reader to run but finally gave it a rest. Now I'm at it again and hope somebody can help med with my issue.

I'm running Newcs 1.67 RC1 (also tried with older versions) using the standard phoenix xml file. Only thing changed is the device to /dev/usb/tts/0. Before starting Newcs I insmod usbserial.ko and ftdi_sio.o. Everything looks normal when running dmesg. Newcs seems to start fine at first but when initializing the card I get an error message (see below close to the bottom in bold). I've tested the reader on my PC and it works fine so I don't think it's a HW problem.

Anybody that has some experience from running Newcs on this router?


This is NewCS 1.67 RC1 [Build: 95] - the New CardServer by the Butter-team..
Compiled on Jul 14 2009 at 11:58:28
Reading Config file from /mnt/newcs-1.67_RC1/bin/./newcs.xml
TCP-log password is enabled, set to: NewCSpwd
TCP-log set to simple mode
level: normal
type: init
output: console
logger config: level 1 type 3 output 1
Console log options: level 1 type 3
[ 10:09:15 ] [ Box detect ] Box type 12 (OpenWRT Router)
[ 10:09:15 ] [ Config ] Option <blockc0> for device 0 (Phoenix Interface) not present, defaulting to NO
[ 10:09:15 ] [ Config ] Value in <ipk> for device 0 (Phoenix Interface) is INVALID, skipping...
[ 10:09:15 ] [ Config ] Value in <ucpk> for device 0 (Phoenix Interface) is INVALID, skipping...
[ 10:09:15 ] [ Config ] Pincode for device 0 (Phoenix Interface): 0000
[ 10:09:15 ] [ Config ] /dev/usb/tts/0 ECM priority: round
[ 10:09:15 ] [ EMM Cache ] Initialising dynamic Cache
[ 10:09:15 ] [ ECM Cache ] Initialising dynamic Cache
[ NewCS ] Process ID is: 10891
[ 10:09:16 ] [ Loader ] Starting Telnet on port 0
[ 10:09:16 ] [ Loader ] Reader type 2 on node /dev/usb/tts/0
[ 10:09:16 ] [ Phoenix ] Opening device /dev/usb/tts/0
[ 10:09:16 ] [ Phoenix ] Setting Parity to: ODD
[ 10:09:16 ] [ Phoenix ] Setting 2 Stop bits on node /dev/usb/tts/0
[ 10:09:16 ] [ Phoenix ] Setting Baud to standard 9600
[ 10:09:16 ] [ Phoenix ] Normal RESET on node /dev/usb/tts/0
[ 10:09:18 ] [ ATR ] T=0 1etu=103.92us Guardtime:12etu WWT:9600etu
[ 10:09:18 ] [ ATR ] Historical bytes: 0 B 0 0
[ 10:09:18 ] [ Loader ] Init Conax card
[ 10:09:18 ] [ Phoenix ] Setting Parity to: EVEN
[ 10:09:18 ] [ Phoenix ] Setting 2 Stop bits on node /dev/usb/tts/0
[ 10:09:18 ] [ Phoenix ] Setting Baud to standard 9600
[ 10:09:19 ] [ Loader ] Card 0B00 on port /dev/usb/tts/0 failed
[ 10:09:20 ] [ Loader ] Starting Newcamd Server on port 19746
[ 10:09:20 ] [ Newcamd ] Newcamd thread Server started on port 19746
newcamd: main loop
[ 10:09:20 ] [ NewCS ] Ready to GO!